Search moodle.org's
Developer Documentation


/ -> config-dist.php (source)
   1  <?php
   2  ///////////////////////////////////////////////////////////////////////////
   3  //                                                                       //
   4  // Moodle configuration file                                             //
   5  //                                                                       //
   6  // This file should be renamed "config.php" in the top-level directory   //
   7  //                                                                       //
   8  ///////////////////////////////////////////////////////////////////////////
   9  //                                                                       //
  10  // NOTICE OF COPYRIGHT                                                   //
  11  //                                                                       //
  12  // Moodle - Modular Object-Oriented Dynamic Learning Environment         //
  13  //          http://moodle.org                                            //
  14  //                                                                       //
  15  // Copyright (C) 1999 onwards  Martin Dougiamas  http://moodle.com       //
  16  //                                                                       //
  17  // This program is free software; you can redistribute it and/or modify  //
  18  // it under the terms of the GNU General Public License as published by  //
  19  // the Free Software Foundation; either version 3 of the License, or     //
  20  // (at your option) any later version.                                   //
  21  //                                                                       //
  22  // This program is distributed in the hope that it will be useful,       //
  23  // but WITHOUT ANY WARRANTY; without even the implied warranty of        //
  24  // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         //
  25  // GNU General Public License for more details:                          //
  26  //                                                                       //
  27  //          http://www.gnu.org/copyleft/gpl.html                         //
  28  //                                                                       //
  29  ///////////////////////////////////////////////////////////////////////////
  30  unset($CFG);  // Ignore this line
  31  global $CFG;  // This is necessary here for PHPUnit execution
  32  $CFG = new stdClass();
  33  
  34  //=========================================================================
  35  // 1. DATABASE SETUP
  36  //=========================================================================
  37  // First, you need to configure the database where all Moodle data       //
  38  // will be stored.  This database must already have been created         //
  39  // and a username/password created to access it.                         //
  40  
  41  $CFG->dbtype    = 'pgsql';      // 'pgsql', 'mariadb', 'mysqli', 'mssql', 'sqlsrv' or 'oci'
  42  $CFG->dblibrary = 'native';     // 'native' only at the moment
  43  $CFG->dbhost    = 'localhost';  // eg 'localhost' or 'db.isp.com' or IP
  44  $CFG->dbname    = 'moodle';     // database name, eg moodle
  45  $CFG->dbuser    = 'username';   // your database username
  46  $CFG->dbpass    = 'password';   // your database password
  47  $CFG->prefix    = 'mdl_';       // prefix to use for all table names
  48  $CFG->dboptions = array(
  49      'dbpersist' => false,       // should persistent database connections be
  50                                  //  used? set to 'false' for the most stable
  51                                  //  setting, 'true' can improve performance
  52                                  //  sometimes
  53      'dbsocket'  => false,       // should connection via UNIX socket be used?
  54                                  //  if you set it to 'true' or custom path
  55                                  //  here set dbhost to 'localhost',
  56                                  //  (please note mysql is always using socket
  57                                  //  if dbhost is 'localhost' - if you need
  58                                  //  local port connection use '127.0.0.1')
  59      'dbport'    => '',          // the TCP port number to use when connecting
  60                                  //  to the server. keep empty string for the
  61                                  //  default port
  62      'dbhandlesoptions' => false,// On PostgreSQL poolers like pgbouncer don't
  63                                  // support advanced options on connection.
  64                                  // If you set those in the database then
  65                                  // the advanced settings will not be sent.
  66  );
  67  
  68  
  69  //=========================================================================
  70  // 2. WEB SITE LOCATION
  71  //=========================================================================
  72  // Now you need to tell Moodle where it is located. Specify the full
  73  // web address to where moodle has been installed.  If your web site
  74  // is accessible via multiple URLs then choose the most natural one
  75  // that your students would use.  Do not include a trailing slash
  76  //
  77  // If you need both intranet and Internet access please read
  78  // http://docs.moodle.org/en/masquerading
  79  
  80  $CFG->wwwroot   = 'http://example.com/moodle';
  81  
  82  
  83  //=========================================================================
  84  // 3. DATA FILES LOCATION
  85  //=========================================================================
  86  // Now you need a place where Moodle can save uploaded files.  This
  87  // directory should be readable AND WRITEABLE by the web server user
  88  // (usually 'nobody' or 'apache'), but it should not be accessible
  89  // directly via the web.
  90  //
  91  // - On hosting systems you might need to make sure that your "group" has
  92  //   no permissions at all, but that "others" have full permissions.
  93  //
  94  // - On Windows systems you might specify something like 'c:\moodledata'
  95  
  96  $CFG->dataroot  = '/home/example/moodledata';
  97  
  98  
  99  //=========================================================================
 100  // 4. DATA FILES PERMISSIONS
 101  //=========================================================================
 102  // The following parameter sets the permissions of new directories
 103  // created by Moodle within the data directory.  The format is in
 104  // octal format (as used by the Unix utility chmod, for example).
 105  // The default is usually OK, but you may want to change it to 0750
 106  // if you are concerned about world-access to the files (you will need
 107  // to make sure the web server process (eg Apache) can access the files.
 108  // NOTE: the prefixed 0 is important, and don't use quotes.
 109  
 110  $CFG->directorypermissions = 02777;
 111  
 112  
 113  //=========================================================================
 114  // 5. DIRECTORY LOCATION  (most people can just ignore this setting)
 115  //=========================================================================
 116  // A very few webhosts use /admin as a special URL for you to access a
 117  // control panel or something.  Unfortunately this conflicts with the
 118  // standard location for the Moodle admin pages.  You can work around this
 119  // by renaming the admin directory in your installation, and putting that
 120  // new name here.  eg "moodleadmin".  This should fix all admin links in Moodle.
 121  // After any change you need to visit your new admin directory
 122  // and purge all caches.
 123  
 124  $CFG->admin = 'admin';
 125  
 126  
 127  //=========================================================================
 128  // 6. OTHER MISCELLANEOUS SETTINGS (ignore these for new installations)
 129  //=========================================================================
 130  //
 131  // These are additional tweaks for which no GUI exists in Moodle yet.
 132  //
 133  // Starting in PHP 5.3 administrators should specify default timezone
 134  // in PHP.ini, you can also specify it here if needed.
 135  // See details at: http://php.net/manual/en/function.date-default-timezone-set.php
 136  // List of time zones at: http://php.net/manual/en/timezones.php
 137  //     date_default_timezone_set('Australia/Perth');
 138  //
 139  // Change the key pair lifetime for Moodle Networking
 140  // The default is 28 days. You would only want to change this if the key
 141  // was not getting regenerated for any reason. You would probably want
 142  // make it much longer. Note that you'll need to delete and manually update
 143  // any existing key.
 144  //      $CFG->mnetkeylifetime = 28;
 145  //
 146  // Not recommended: Set the following to true to allow the use
 147  // off non-Moodle standard characters in usernames.
 148  //      $CFG->extendedusernamechars = true;
 149  //
 150  // Allow user passwords to be included in backup files. Very dangerous
 151  // setting as far as it publishes password hashes that can be unencrypted
 152  // if the backup file is publicy available. Use it only if you can guarantee
 153  // that all your backup files remain only privacy available and are never
 154  // shared out from your site/institution!
 155  //      $CFG->includeuserpasswordsinbackup = true;
 156  //
 157  // Completely disable user creation when restoring a course, bypassing any
 158  // permissions granted via roles and capabilities. Enabling this setting
 159  // results in the restore process stopping when a user attempts to restore a
 160  // course requiring users to be created.
 161  //     $CFG->disableusercreationonrestore = true;
 162  //
 163  // Keep the temporary directories used by backup and restore without being
 164  // deleted at the end of the process. Use it if you want to debug / view
 165  // all the information stored there after the process has ended. Note that
 166  // those directories may be deleted (after some ttl) both by cron and / or
 167  // by new backup / restore invocations.
 168  //     $CFG->keeptempdirectoriesonbackup = true;
 169  //
 170  // Modify the restore process in order to force the "user checks" to assume
 171  // that the backup originated from a different site, so detection of matching
 172  // users is performed with different (more "relaxed") rules. Note that this is
 173  // only useful if the backup file has been created using Moodle < 1.9.4 and the
 174  // site has been rebuilt from scratch using backup files (not the best way btw).
 175  // If you obtain user conflicts on restore, rather than enabling this setting
 176  // permanently, try restoring the backup on a different site, back it up again
 177  // and then restore on the target server.
 178  //    $CFG->forcedifferentsitecheckingusersonrestore = true;
 179  //
 180  // Force the backup system to continue to create backups in the legacy zip
 181  // format instead of the new tgz format. Does not affect restore, which
 182  // auto-detects the underlying file format.
 183  //    $CFG->usezipbackups = true;
 184  //
 185  // Prevent stats processing and hide the GUI
 186  //      $CFG->disablestatsprocessing = true;
 187  //
 188  // Setting this to true will enable admins to edit any post at any time
 189  //      $CFG->admineditalways = true;
 190  //
 191  // These variables define DEFAULT block variables for new courses
 192  // If this one is set it overrides all others and is the only one used.
 193  //      $CFG->defaultblocks_override = 'participants,activity_modules,search_forums,course_list:news_items,calendar_upcoming,recent_activity';
 194  //
 195  // These variables define the specific settings for defined course formats.
 196  // They override any settings defined in the formats own config file.
 197  //      $CFG->defaultblocks_site = 'site_main_menu,course_list:course_summary,calendar_month';
 198  //      $CFG->defaultblocks_social = 'participants,search_forums,calendar_month,calendar_upcoming,social_activities,recent_activity,course_list';
 199  //      $CFG->defaultblocks_topics = 'participants,activity_modules,search_forums,course_list:news_items,calendar_upcoming,recent_activity';
 200  //      $CFG->defaultblocks_weeks = 'participants,activity_modules,search_forums,course_list:news_items,calendar_upcoming,recent_activity';
 201  //
 202  // These blocks are used when no other default setting is found.
 203  //      $CFG->defaultblocks = 'participants,activity_modules,search_forums,course_list:news_items,calendar_upcoming,recent_activity';
 204  //
 205  // You can specify a different class to be created for the $PAGE global, and to
 206  // compute which blocks appear on each page. However, I cannot think of any good
 207  // reason why you would need to change that. It just felt wrong to hard-code the
 208  // the class name. You are strongly advised not to use these to settings unless
 209  // you are absolutely sure you know what you are doing.
 210  //      $CFG->moodlepageclass = 'moodle_page';
 211  //      $CFG->moodlepageclassfile = "$CFG->dirroot/local/myplugin/mypageclass.php";
 212  //      $CFG->blockmanagerclass = 'block_manager';
 213  //      $CFG->blockmanagerclassfile = "$CFG->dirroot/local/myplugin/myblockamanagerclass.php";
 214  //
 215  // Seconds for files to remain in caches. Decrease this if you are worried
 216  // about students being served outdated versions of uploaded files.
 217  //     $CFG->filelifetime = 60*60*6;
 218  //
 219  // Some web servers can offload the file serving from PHP process,
 220  // comment out one the following options to enable it in Moodle:
 221  //     $CFG->xsendfile = 'X-Sendfile';           // Apache {@see https://tn123.org/mod_xsendfile/}
 222  //     $CFG->xsendfile = 'X-LIGHTTPD-send-file'; // Lighttpd {@see http://redmine.lighttpd.net/projects/lighttpd/wiki/X-LIGHTTPD-send-file}
 223  //     $CFG->xsendfile = 'X-Accel-Redirect';     // Nginx {@see http://wiki.nginx.org/XSendfile}
 224  // If your X-Sendfile implementation (usually Nginx) uses directory aliases specify them
 225  // in the following array setting:
 226  //     $CFG->xsendfilealiases = array(
 227  //         '/dataroot/' => $CFG->dataroot,
 228  //         '/cachedir/' => '/var/www/moodle/cache',    // for custom $CFG->cachedir locations
 229  //         '/localcachedir/' => '/var/local/cache',    // for custom $CFG->localcachedir locations
 230  //         '/tempdir/'  => '/var/www/moodle/temp',     // for custom $CFG->tempdir locations
 231  //         '/filedir'   => '/var/www/moodle/filedir',  // for custom $CFG->filedir locations
 232  //     );
 233  //
 234  // YUI caching may be sometimes improved by slasharguments:
 235  //     $CFG->yuislasharguments = 1;
 236  // Some servers may need a special rewrite rule to work around internal path length limitations:
 237  // RewriteRule (^.*/theme/yui_combo\.php)(/.*) $1?file=$2
 238  //
 239  //
 240  // Following settings may be used to select session driver, uncomment only one of the handlers.
 241  //   Database session handler (not compatible with MyISAM):
 242  //      $CFG->session_handler_class = '\core\session\database';
 243  //      $CFG->session_database_acquire_lock_timeout = 120;
 244  //
 245  //   File session handler (file system locking required):
 246  //      $CFG->session_handler_class = '\core\session\file';
 247  //      $CFG->session_file_save_path = $CFG->dataroot.'/sessions';
 248  //
 249  //   Memcached session handler (requires memcached server and extension):
 250  //      $CFG->session_handler_class = '\core\session\memcached';
 251  //      $CFG->session_memcached_save_path = '127.0.0.1:11211';
 252  //      $CFG->session_memcached_prefix = 'memc.sess.key.';
 253  //      $CFG->session_memcached_acquire_lock_timeout = 120;
 254  //      $CFG->session_memcached_lock_expire = 7200;       // Ignored if PECL memcached is below version 2.2.0
 255  //
 256  //   Redis session handler (requires redis server and redis extension):
 257  //      $CFG->session_handler_class = '\core\session\redis';
 258  //      $CFG->session_redis_host = '127.0.0.1';
 259  //      $CFG->session_redis_port = 6379;  // Optional.
 260  //      $CFG->session_redis_database = 0;  // Optional, default is db 0.
 261  //      $CFG->session_redis_prefix = ''; // Optional, default is don't set one.
 262  //      $CFG->session_redis_acquire_lock_timeout = 120;
 263  //      $CFG->session_redis_lock_expire = 7200;
 264  //
 265  //   Memcache session handler (requires memcached server and memcache extension):
 266  //      $CFG->session_handler_class = '\core\session\memcache';
 267  //      $CFG->session_memcache_save_path = '127.0.0.1:11211';
 268  //      $CFG->session_memcache_acquire_lock_timeout = 120;
 269  //      ** NOTE: Memcache extension has less features than memcached and may be
 270  //         less reliable. Use memcached where possible or if you encounter
 271  //         session problems. **
 272  //
 273  // Please be aware that when selecting either Memcached or Memcache for sessions that it is advised to use a dedicated
 274  // memcache server. The memcache and memcached extensions do not provide isolated environments for individual uses.
 275  // Using the same server for other purposes (MUC for example) can lead to sessions being prematurely removed should
 276  // the other uses of the server purge the cache.
 277  //
 278  // Following setting allows you to alter how frequently is timemodified updated in sessions table.
 279  //      $CFG->session_update_timemodified_frequency = 20; // In seconds.
 280  //
 281  // If this setting is set to true, then Moodle will track the IP of the
 282  // current user to make sure it hasn't changed during a session.  This
 283  // will prevent the possibility of sessions being hijacked via XSS, but it
 284  // may break things for users coming using proxies that change all the time,
 285  // like AOL.
 286  //      $CFG->tracksessionip = true;
 287  //
 288  // The following lines are for handling email bounces.
 289  //      $CFG->handlebounces = true;
 290  //      $CFG->minbounces = 10;
 291  //      $CFG->bounceratio = .20;
 292  // The next lines are needed both for bounce handling and any other email to module processing.
 293  // mailprefix must be EXACTLY four characters.
 294  // Uncomment and customise this block for Postfix
 295  //      $CFG->mailprefix = 'mdl+'; // + is the separator for Exim and Postfix.
 296  //      $CFG->mailprefix = 'mdl-'; // - is the separator for qmail
 297  //      $CFG->maildomain = 'youremaildomain.com';
 298  //
 299  // Enable when setting up advanced reverse proxy load balancing configurations,
 300  // it may be also necessary to enable this when using port forwarding.
 301  //      $CFG->reverseproxy = true;
 302  //
 303  // Enable when using external SSL appliance for performance reasons.
 304  // Please note that site may be accessible via http: or https:, but not both!
 305  //      $CFG->sslproxy = true;
 306  //
 307  // This setting will cause the userdate() function not to fix %d in
 308  // date strings, and just let them show with a zero prefix.
 309  //      $CFG->nofixday = true;
 310  //
 311  // This setting will make some graphs (eg user logs) use lines instead of bars
 312  //      $CFG->preferlinegraphs = true;
 313  //
 314  // This setting allows you to specify a class to rewrite outgoing urls
 315  // enabling 'clean urls' in conjunction with an apache / nginx handler.
 316  // The handler must implement \core\output\url_rewriter.
 317  //      $CFG->urlrewriteclass = '\local_cleanurls\url_rewriter';
 318  //
 319  // Enabling this will allow custom scripts to replace existing moodle scripts.
 320  // For example: if $CFG->customscripts/course/view.php exists then
 321  // it will be used instead of $CFG->wwwroot/course/view.php
 322  // At present this will only work for files that include config.php and are called
 323  // as part of the url (index.php is implied).
 324  // Some examples are:
 325  //      http://my.moodle.site/course/view.php
 326  //      http://my.moodle.site/index.php
 327  //      http://my.moodle.site/admin            (index.php implied)
 328  // Custom scripts should not include config.php
 329  // Warning: Replacing standard moodle scripts may pose security risks and/or may not
 330  // be compatible with upgrades. Use this option only if you are aware of the risks
 331  // involved.
 332  // Specify the full directory path to the custom scripts
 333  //      $CFG->customscripts = '/home/example/customscripts';
 334  //
 335  // Performance profiling
 336  //
 337  //   If you set Debug to "Yes" in the Configuration->Variables page some
 338  //   performance profiling data will show up on your footer (in default theme).
 339  //   With these settings you get more granular control over the capture
 340  //   and printout of the data
 341  //
 342  //   Capture performance profiling data
 343  //   define('MDL_PERF'  , true);
 344  //
 345  //   Capture additional data from DB
 346  //   define('MDL_PERFDB'  , true);
 347  //
 348  //   Print to log (for passive profiling of production servers)
 349  //   define('MDL_PERFTOLOG'  , true);
 350  //
 351  //   Print to footer (works with the default theme)
 352  //   define('MDL_PERFTOFOOT', true);
 353  //
 354  //   Enable earlier profiling that causes more code to be covered
 355  //   on every request (db connections, config load, other inits...).
 356  //   Requires extra configuration to be defined in config.php like:
 357  //   profilingincluded, profilingexcluded, profilingautofrec,
 358  //   profilingallowme, profilingallowall, profilinglifetime
 359  //       $CFG->earlyprofilingenabled = true;
 360  //
 361  // Force displayed usernames
 362  //   A little hack to anonymise user names for all students.  If you set these
 363  //   then all non-teachers will always see these for every person.
 364  //       $CFG->forcefirstname = 'Bruce';
 365  //       $CFG->forcelastname  = 'Simpson';
 366  //
 367  // The following setting will turn on username logging into Apache log. For full details regarding setting
 368  // up of this function please refer to the install section of the document.
 369  //     $CFG->apacheloguser = 0; // Turn this feature off. Default value.
 370  //     $CFG->apacheloguser = 1; // Log user id.
 371  //     $CFG->apacheloguser = 2; // Log full name in cleaned format. ie, Darth Vader will be displayed as darth_vader.
 372  //     $CFG->apacheloguser = 3; // Log username.
 373  // To get the values logged in Apache's log, add to your httpd.conf
 374  // the following statements. In the General part put:
 375  //     LogFormat "%h %l %{MOODLEUSER}n %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\"" moodleformat
 376  // And in the part specific to your Moodle install / virtualhost:
 377  //     CustomLog "/your/path/to/log" moodleformat
 378  // CAUTION: Use of this option will expose usernames in the Apache log,
 379  // If you are going to publish your log, or the output of your web stats analyzer
 380  // this will weaken the security of your website.
 381  //
 382  // Email database connection errors to someone.  If Moodle cannot connect to the
 383  // database, then email this address with a notice.
 384  //
 385  //     $CFG->emailconnectionerrorsto = 'your@emailaddress.com';
 386  //
 387  // Set the priority of themes from highest to lowest. This is useful (for
 388  // example) in sites where the user theme should override all other theme
 389  // settings for accessibility reasons. You can also disable types of themes
 390  // (other than site)  by removing them from the array. The default setting is:
 391  //      $CFG->themeorder = array('course', 'category', 'session', 'user', 'site');
 392  // NOTE: course, category, session, user themes still require the
 393  // respective settings to be enabled
 394  //
 395  // It is possible to add extra themes directory stored outside of $CFG->dirroot.
 396  // This local directory does not have to be accessible from internet.
 397  //
 398  //     $CFG->themedir = '/location/of/extra/themes';
 399  //
 400  // It is possible to specify different cache and temp directories, use local fast filesystem
 401  // for normal web servers. Server clusters MUST use shared filesystem for cachedir!
 402  // Localcachedir is intended for server clusters, it does not have to be shared by cluster nodes.
 403  // The directories must not be accessible via web.
 404  //
 405  //     $CFG->tempdir = '/var/www/moodle/temp';        // Directory MUST BE SHARED by all clsuter nodes.
 406  //     $CFG->cachedir = '/var/www/moodle/cache';      // Directory MUST BE SHARED by all cluster nodes, locking required.
 407  //     $CFG->localcachedir = '/var/local/cache';      // Intended for local node caching.
 408  //
 409  // Some filesystems such as NFS may not support file locking operations.
 410  // Locking resolves race conditions and is strongly recommended for production servers.
 411  //     $CFG->preventfilelocking = false;
 412  //
 413  // Site default language can be set via standard administration interface. If you
 414  // want to have initial error messages for eventual database connection problems
 415  // localized too, you have to set your language code here.
 416  //
 417  //     $CFG->lang = 'yourlangcode'; // for example 'cs'
 418  //
 419  // When Moodle is about to perform an intensive operation it raises PHP's memory
 420  // limit. The following setting should be used on large sites to set the raised
 421  // memory limit to something higher.
 422  // The value for the settings should be a valid PHP memory value. e.g. 512M, 1G
 423  //
 424  //     $CFG->extramemorylimit = '1024M';
 425  //
 426  // Moodle 2.4 introduced a new cache API.
 427  // The cache API stores a configuration file within the Moodle data directory and
 428  // uses that rather than the database in order to function in a stand-alone manner.
 429  // Using altcacheconfigpath you can change the location where this config file is
 430  // looked for.
 431  // It can either be a directory in which to store the file, or the full path to the
 432  // file if you want to take full control. Either way it must be writable by the
 433  // webserver.
 434  //
 435  //     $CFG->altcacheconfigpath = '/var/www/shared/moodle.cache.config.php
 436  //
 437  // Use the following flag to completely disable the Available update notifications
 438  // feature and hide it from the server administration UI.
 439  //
 440  //      $CFG->disableupdatenotifications = true;
 441  //
 442  // Use the following flag to completely disable the installation of plugins
 443  // (new plugins, available updates and missing dependencies) and related
 444  // features (such as cancelling the plugin installation or upgrade) via the
 445  // server administration web interface.
 446  //
 447  //      $CFG->disableupdateautodeploy = true;
 448  //
 449  // Use the following flag to disable modifications to scheduled tasks
 450  // whilst still showing the state of tasks.
 451  //
 452  //      $CFG->preventscheduledtaskchanges = true;
 453  //
 454  // As of version 2.4 Moodle serves icons as SVG images if the users browser appears
 455  // to support SVG.
 456  // For those wanting to control the serving of SVG images the following setting can
 457  // be defined in your config.php.
 458  // If it is not defined then the default (browser detection) will occur.
 459  //
 460  // To ensure they are always used when available:
 461  //      $CFG->svgicons = true;
 462  //
 463  // To ensure they are never used even when available:
 464  //      $CFG->svgicons = false;
 465  //
 466  // Some administration options allow setting the path to executable files. This can
 467  // potentially cause a security risk. Set this option to true to disable editing
 468  // those config settings via the web. They will need to be set explicitly in the
 469  // config.php file
 470  //      $CFG->preventexecpath = true;
 471  //
 472  // Use the following flag to set userid for noreply user. If not set then moodle will
 473  // create dummy user and use -ve value as user id.
 474  //      $CFG->noreplyuserid = -10;
 475  //
 476  // As of version 2.6 Moodle supports admin to set support user. If not set, all mails
 477  // will be sent to supportemail.
 478  //      $CFG->supportuserid = -20;
 479  //
 480  // Moodle 2.7 introduces a locking api for critical tasks (e.g. cron).
 481  // The default locking system to use is DB locking for Postgres, and file locking for
 482  // MySQL, Oracle and SQLServer. If $CFG->preventfilelocking is set, then the default
 483  // will always be DB locking. It can be manually set to one of the lock
 484  // factory classes listed below, or one of your own custom classes implementing the
 485  // \core\lock\lock_factory interface.
 486  //
 487  //      $CFG->lock_factory = "auto";
 488  //
 489  // The list of available lock factories is:
 490  //
 491  // "\\core\\lock\\file_lock_factory" - File locking
 492  //      Uses lock files stored by default in the dataroot. Whether this
 493  //      works on clusters depends on the file system used for the dataroot.
 494  //
 495  // "\\core\\lock\\db_record_lock_factory" - DB locking based on table rows.
 496  //
 497  // "\\core\\lock\\postgres_lock_factory" - DB locking based on postgres advisory locks.
 498  //
 499  // Settings used by the lock factories
 500  //
 501  // Location for lock files used by the File locking factory. This must exist
 502  // on a shared file system that supports locking.
 503  //      $CFG->lock_file_root = $CFG->dataroot . '/lock';
 504  //
 505  // Moodle 2.9 allows administrators to customise the list of supported file types.
 506  // To add a new filetype or override the definition of an existing one, set the
 507  // customfiletypes variable like this:
 508  //
 509  // $CFG->customfiletypes = array(
 510  //     (object)array(
 511  //         'extension' => 'frog',
 512  //         'icon' => 'archive',
 513  //         'type' => 'application/frog',
 514  //         'customdescription' => 'Amphibian-related file archive'
 515  //     )
 516  // );
 517  //
 518  // The extension, icon, and type fields are required. The icon field can refer to
 519  // any icon inside the pix/f folder. You can also set the customdescription field
 520  // (shown above) and (for advanced use) the groups, string, and defaulticon fields.
 521  //
 522  // Upgrade key
 523  //
 524  // If the upgrade key is defined here, then the value must be provided every time
 525  // the site is being upgraded though the web interface, regardless of whether the
 526  // administrator is logged in or not. This prevents anonymous access to the upgrade
 527  // screens where the real authentication and authorization mechanisms can not be
 528  // relied on.
 529  //
 530  // It is strongly recommended to use a value different from your real account
 531  // password.
 532  //
 533  //      $CFG->upgradekey = 'put_some_password-like_value_here';
 534  //
 535  //=========================================================================
 536  // 7. SETTINGS FOR DEVELOPMENT SERVERS - not intended for production use!!!
 537  //=========================================================================
 538  //
 539  // Force a debugging mode regardless the settings in the site administration
 540  // @error_reporting(E_ALL | E_STRICT); // NOT FOR PRODUCTION SERVERS!
 541  // @ini_set('display_errors', '1');    // NOT FOR PRODUCTION SERVERS!
 542  // $CFG->debug = (E_ALL | E_STRICT);   // === DEBUG_DEVELOPER - NOT FOR PRODUCTION SERVERS!
 543  // $CFG->debugdisplay = 1;             // NOT FOR PRODUCTION SERVERS!
 544  //
 545  // You can specify a comma separated list of user ids that that always see
 546  // debug messages, this overrides the debug flag in $CFG->debug and $CFG->debugdisplay
 547  // for these users only.
 548  // $CFG->debugusers = '2';
 549  //
 550  // Prevent theme caching
 551  // $CFG->themedesignermode = true; // NOT FOR PRODUCTION SERVERS!
 552  //
 553  // Enable verbose debug information during fetching of email messages from IMAP server.
 554  // $CFG->debugimap = true;
 555  //
 556  // Prevent JS caching
 557  // $CFG->cachejs = false; // NOT FOR PRODUCTION SERVERS!
 558  //
 559  // Restrict which YUI logging statements are shown in the browser console.
 560  // For details see the upstream documentation:
 561  //   http://yuilibrary.com/yui/docs/api/classes/config.html#property_logInclude
 562  //   http://yuilibrary.com/yui/docs/api/classes/config.html#property_logExclude
 563  // $CFG->yuiloginclude = array(
 564  //     'moodle-core-dock-loader' => true,
 565  //     'moodle-course-categoryexpander' => true,
 566  // );
 567  // $CFG->yuilogexclude = array(
 568  //     'moodle-core-dock' => true,
 569  //     'moodle-core-notification' => true,
 570  // );
 571  //
 572  // Set the minimum log level for YUI logging statements.
 573  // For details see the upstream documentation:
 574  //   http://yuilibrary.com/yui/docs/api/classes/config.html#property_logLevel
 575  // $CFG->yuiloglevel = 'debug';
 576  //
 577  // Prevent core_string_manager application caching
 578  // $CFG->langstringcache = false; // NOT FOR PRODUCTION SERVERS!
 579  //
 580  // When working with production data on test servers, no emails or other messages
 581  // should ever be send to real users
 582  // $CFG->noemailever = true;    // NOT FOR PRODUCTION SERVERS!
 583  //
 584  // Divert all outgoing emails to this address to test and debug emailing features
 585  // $CFG->divertallemailsto = 'root@localhost.local'; // NOT FOR PRODUCTION SERVERS!
 586  //
 587  // Except for certain email addresses you want to let through for testing. Accepts
 588  // a comma separated list of regexes.
 589  // $CFG->divertallemailsexcept = 'tester@dev.com, fred(\+.*)?@example.com'; // NOT FOR PRODUCTION SERVERS!
 590  //
 591  // Uncomment if you want to allow empty comments when modifying install.xml files.
 592  // $CFG->xmldbdisablecommentchecking = true;    // NOT FOR PRODUCTION SERVERS!
 593  //
 594  // Since 2.0 sql queries are not shown during upgrade by default.
 595  // Please note that this setting may produce very long upgrade page on large sites.
 596  // $CFG->upgradeshowsql = true; // NOT FOR PRODUCTION SERVERS!
 597  //
 598  // Add SQL queries to the output of cron, just before their execution
 599  // $CFG->showcronsql = true;
 600  //
 601  // Force developer level debug and add debug info to the output of cron
 602  // $CFG->showcrondebugging = true;
 603  //
 604  //=========================================================================
 605  // 8. FORCED SETTINGS
 606  //=========================================================================
 607  // It is possible to specify normal admin settings here, the point is that
 608  // they can not be changed through the standard admin settings pages any more.
 609  //
 610  // Core settings are specified directly via assignment to $CFG variable.
 611  // Example:
 612  //   $CFG->somecoresetting = 'value';
 613  //
 614  // Plugin settings have to be put into a special array.
 615  // Example:
 616  //   $CFG->forced_plugin_settings = array('pluginname'  => array('settingname' => 'value', 'secondsetting' => 'othervalue'),
 617  //                                        'otherplugin' => array('mysetting' => 'myvalue', 'thesetting' => 'thevalue'));
 618  // Module default settings with advanced/locked checkboxes can be set too. To do this, add
 619  // an extra config with '_adv' or '_locked' as a suffix and set the value to true or false.
 620  // Example:
 621  //   $CFG->forced_plugin_settings = array('pluginname'  => array('settingname' => 'value', 'settingname_locked' => true, 'settingname_adv' => true));
 622  //
 623  //=========================================================================
 624  // 9. PHPUNIT SUPPORT
 625  //=========================================================================
 626  // $CFG->phpunit_prefix = 'phpu_';
 627  // $CFG->phpunit_dataroot = '/home/example/phpu_moodledata';
 628  // $CFG->phpunit_directorypermissions = 02777; // optional
 629  // $CFG->phpunit_profilingenabled = true; // optional to profile PHPUnit runs.
 630  //
 631  //
 632  //=========================================================================
 633  // 10. SECRET PASSWORD SALT
 634  //=========================================================================
 635  // A site-wide password salt is no longer used in new installations.
 636  // If upgrading from 2.6 or older, keep all existing salts in config.php file.
 637  //
 638  // $CFG->passwordsaltmain = 'a_very_long_random_string_of_characters#@6&*1';
 639  //
 640  // You may also have some alternative salts to allow migration from previously
 641  // used salts.
 642  //
 643  // $CFG->passwordsaltalt1 = '';
 644  // $CFG->passwordsaltalt2 = '';
 645  // $CFG->passwordsaltalt3 = '';
 646  // ....
 647  // $CFG->passwordsaltalt19 = '';
 648  // $CFG->passwordsaltalt20 = '';
 649  //
 650  //
 651  //=========================================================================
 652  // 11. BEHAT SUPPORT
 653  //=========================================================================
 654  // Behat test site needs a unique www root, data directory and database prefix:
 655  //
 656  // $CFG->behat_wwwroot = 'http://127.0.0.1/moodle';
 657  // $CFG->behat_prefix = 'bht_';
 658  // $CFG->behat_dataroot = '/home/example/bht_moodledata';
 659  //
 660  // You can override default Moodle configuration for Behat and add your own
 661  // params; here you can add more profiles, use different Mink drivers than Selenium...
 662  // These params would be merged with the default Moodle behat.yml, giving priority
 663  // to the ones specified here. The array format is YAML, following the Behat
 664  // params hierarchy. More info: http://docs.behat.org/guides/7.config.html
 665  // Example:
 666  //   $CFG->behat_config = array(
 667  //       'Mac-Firefox' => array(
 668  //           'suites' => array (
 669  //               'default' => array(
 670  //                   'filters' => array(
 671  //                      'tags' => '~@_file_upload'
 672  //                   ),
 673  //               ),
 674  //           ),
 675  //           'extensions' => array(
 676  //               'Behat\MinkExtension' => array(
 677  //                   'selenium2' => array(
 678  //                       'browser' => 'firefox',
 679  //                       'capabilities' => array(
 680  //                           'platform' => 'OS X 10.6',
 681  //                           'version' => 20
 682  //                       )
 683  //                   )
 684  //               )
 685  //           )
 686  //       ),
 687  //       'Mac-Safari' => array(
 688  //           'extensions' => array(
 689  //               'Behat\MinkExtension' => array(
 690  //                   'selenium2' => array(
 691  //                       'browser' => 'safari',
 692  //                       'capabilities' => array(
 693  //                           'platform' => 'OS X 10.8',
 694  //                           'version' => 6
 695  //                       )
 696  //                   )
 697  //               )
 698  //           )
 699  //       )
 700  //   );
 701  // You can also use the following config to override default Moodle configuration for Behat.
 702  // This config is limited to default suite and will be supported in later versions.
 703  // It will have precedence over $CFG->behat_config.
 704  // $CFG->behat_profiles = array(
 705  //     'phantomjs' => array(
 706  //         'browser' => 'phantomjs',
 707  //         'tags' => '~@_file_upload&&~@_alert&&~@_bug_phantomjs',
 708  //         'wd_host' => 'http://127.0.0.1:4443/wd/hub',
 709  //         'capabilities' => array(
 710  //             'platform' => 'Linux',
 711  //             'version' => 2.1
 712  //         )
 713  //     ),
 714  // );
 715  //
 716  // You can force the browser session (not user's sessions) to restart after N seconds. This could
 717  // be useful if you are using a cloud-based service with time restrictions in the browser side.
 718  // Setting this value the browser session that Behat is using will be restarted. Set the time in
 719  // seconds. Is not recommended to use this setting if you don't explicitly need it.
 720  // Example:
 721  //   $CFG->behat_restart_browser_after = 7200;     // Restarts the browser session after 2 hours
 722  //
 723  // All this page's extra Moodle settings are compared against a white list of allowed settings
 724  // (the basic and behat_* ones) to avoid problems with production environments. This setting can be
 725  // used to expand the default white list with an array of extra settings.
 726  // Example:
 727  //   $CFG->behat_extraallowedsettings = array('somecoresetting', ...);
 728  //
 729  // You should explicitly allow the usage of the deprecated behat steps, otherwise an exception will
 730  // be thrown when using them. The setting is disabled by default.
 731  // Example:
 732  //   $CFG->behat_usedeprecated = true;
 733  //
 734  // Including feature files from directories outside the dirroot is possible if required. The setting
 735  // requires that the running user has executable permissions on all parent directories in the paths.
 736  // Example:
 737  //   $CFG->behat_additionalfeatures = array('/home/developer/code/wipfeatures');
 738  //
 739  // You can make behat save several dumps when a scenario fails. The dumps currently saved are:
 740  // * a dump of the DOM in it's state at the time of failure; and
 741  // * a screenshot (JavaScript is required for the screenshot functionality, so not all browsers support this option)
 742  // Example:
 743  //   $CFG->behat_faildump_path = '/my/path/to/save/failure/dumps';
 744  //
 745  // You can specify db, selenium wd_host etc. for behat parallel run by setting following variable.
 746  // Example:
 747  //   $CFG->behat_parallel_run = array (
 748  //       array (
 749  //           'dbtype' => 'mysqli',
 750  //           'dblibrary' => 'native',
 751  //           'dbhost' => 'localhost',
 752  //           'dbname' => 'moodletest',
 753  //           'dbuser' => 'moodle',
 754  //           'dbpass' => 'moodle',
 755  //           'behat_prefix' => 'mdl_',
 756  //           'wd_host' => 'http://127.0.0.1:4444/wd/hub',
 757  //           'behat_wwwroot' => 'http://127.0.0.1/moodle',
 758  //           'behat_dataroot' => '/home/example/bht_moodledata'
 759  //       ),
 760  //   );
 761  //
 762  // To change name of behat parallel run site, define BEHAT_PARALLEL_SITE_NAME and parallel run sites will be suffixed
 763  // with this value
 764  // Example:
 765  //   define('BEHAT_PARALLEL_SITE_NAME', 'behatparallelsite');
 766  //
 767  // Command line output for parallel behat install is limited to 80 chars, if you are installing more then 4 sites and
 768  // want to expand output to more then 80 chars, then define BEHAT_MAX_CMD_LINE_OUTPUT
 769  // Example:
 770  //   define('BEHAT_MAX_CMD_LINE_OUTPUT', 120);
 771  //
 772  // Behat feature files will be distributed randomly between the processes by default. If you have timing file or want
 773  // to create timing file then define BEHAT_FEATURE_TIMING_FILE with path to timing file. It will be updated for each
 774  // run with latest time taken to execute feature.
 775  // Example:
 776  //   define('BEHAT_FEATURE_TIMING_FILE', '/PATH_TO_TIMING_FILE/timing.json');
 777  //
 778  // If you don't have timing file and want some stable distribution of features, then you can use step counts to
 779  // distribute the features. You can generate step file by executing php admin/tool/behat/cli/util.php --updatesteps
 780  // this will update step file which is defined by BEHAT_FEATURE_STEP_FILE.
 781  // Example:
 782  //   define('BEHAT_FEATURE_STEP_FILE', '/PATH_TO_FEATURE_STEP_COUNT_FILE/stepcount.json');
 783  //
 784  // Feature distribution for each process is displayed as histogram. you can disable it by setting
 785  // BEHAT_DISABLE_HISTOGRAM
 786  // Example:
 787  //   define('BEHAT_DISABLE_HISTOGRAM', true);
 788  //
 789  //=========================================================================
 790  // 12. DEVELOPER DATA GENERATOR
 791  //=========================================================================
 792  //
 793  // The developer data generator tool is intended to be used only in development or testing sites and
 794  // it's usage in production environments is not recommended; if it is used to create JMeter test plans
 795  // is even less recommended as JMeter needs to log in as site course users. JMeter needs to know the
 796  // users passwords but would be dangerous to have a default password as everybody would know it, which would
 797  // be specially dangerouse if somebody uses this tool in a production site, so in order to prevent unintended
 798  // uses of the tool and undesired accesses as well, is compulsory to set a password for the users
 799  // generated by this tool, but only in case you want to generate a JMeter test. The value should be a string.
 800  // Example:
 801  //   $CFG->tool_generator_users_password = 'examplepassword';
 802  //
 803  //=========================================================================
 804  // 13. SYSTEM PATHS (You need to set following, depending on your system)
 805  //=========================================================================
 806  // Ghostscript path.
 807  // On most Linux installs, this can be left as '/usr/bin/gs'.
 808  // On Windows it will be something like 'c:\gs\bin\gswin32c.exe' (make sure
 809  // there are no spaces in the path - if necessary copy the files 'gswin32c.exe'
 810  // and 'gsdll32.dll' to a new folder without a space in the path)
 811  //      $CFG->pathtogs = '/usr/bin/gs';
 812  //
 813  // Path to du.
 814  // Probably something like /usr/bin/du. If you enter this, pages that display
 815  // directory contents will run much faster for directories with a lot of files.
 816  //      $CFG->pathtodu = '';
 817  //
 818  // Path to aspell.
 819  // To use spell-checking within the editor, you MUST have aspell 0.50 or later
 820  // installed on your server, and you must specify the correct path to access the
 821  // aspell binary. On Unix/Linux systems, this path is usually /usr/bin/aspell,
 822  // but it might be something else.
 823  //      $CFG->aspellpath = '';
 824  //
 825  // Path to dot.
 826  // Probably something like /usr/bin/dot. To be able to generate graphics from
 827  // DOT files, you must have installed the dot executable and point to it here.
 828  // Note that, for now, this only used by the profiling features
 829  // (Development->Profiling) built into Moodle.
 830  //      $CFG->pathtodot = '';
 831  //
 832  // Path to unoconv.
 833  // Probably something like /usr/bin/unoconv. Used as a fallback to convert between document formats.
 834  // Unoconv is used convert between file formats supported by LibreOffice.
 835  // Use a recent version of unoconv ( >= 0.7 ), older versions have trouble running from a webserver.
 836  //      $CFG->pathtounoconv = '';
 837  
 838  //=========================================================================
 839  // ALL DONE!  To continue installation, visit your main page with a browser
 840  //=========================================================================
 841  
 842  require_once (__DIR__ . '/lib/setup.php'); // Do not edit
 843  
 844  // There is no php closing tag in this file,
 845  // it is intentional because it prevents trailing whitespace problems!

Search This Site: