Search moodle.org's
Developer Documentation


Long Term Support Release

  • Bug fixes for general core bugs in 3.9.x will end* 10 May 2021 (12 months).
  • Bug fixes for security issues in 3.9.x will end* 8 May 2023 (36 months).
  • PHP version: minimum PHP 7.2.0 Note: minimum PHP version has increased since Moodle 3.8. PHP 7.3.x and 7.4.x are supported too.
  • / -> config-dist.php (source)

    Differences Between: [Versions 32 and 39] [Versions 33 and 39] [Versions 34 and 39] [Versions 35 and 39] [Versions 36 and 39] [Versions 37 and 39] [Versions 38 and 39]

       1  <?php
       2  ///////////////////////////////////////////////////////////////////////////
       3  //                                                                       //
       4  // Moodle configuration file                                             //
       5  //                                                                       //
       6  // This file should be renamed "config.php" in the top-level directory   //
       7  //                                                                       //
       8  ///////////////////////////////////////////////////////////////////////////
       9  //                                                                       //
      10  // NOTICE OF COPYRIGHT                                                   //
      11  //                                                                       //
      12  // Moodle - Modular Object-Oriented Dynamic Learning Environment         //
      13  //          http://moodle.org                                            //
      14  //                                                                       //
      15  // Copyright (C) 1999 onwards  Martin Dougiamas  http://moodle.com       //
      16  //                                                                       //
      17  // This program is free software; you can redistribute it and/or modify  //
      18  // it under the terms of the GNU General Public License as published by  //
      19  // the Free Software Foundation; either version 3 of the License, or     //
      20  // (at your option) any later version.                                   //
      21  //                                                                       //
      22  // This program is distributed in the hope that it will be useful,       //
      23  // but WITHOUT ANY WARRANTY; without even the implied warranty of        //
      24  // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         //
      25  // GNU General Public License for more details:                          //
      26  //                                                                       //
      27  //          http://www.gnu.org/copyleft/gpl.html                         //
      28  //                                                                       //
      29  ///////////////////////////////////////////////////////////////////////////
      30  unset($CFG);  // Ignore this line
      31  global $CFG;  // This is necessary here for PHPUnit execution
      32  $CFG = new stdClass();
      33  
      34  //=========================================================================
      35  // 1. DATABASE SETUP
      36  //=========================================================================
      37  // First, you need to configure the database where all Moodle data       //
      38  // will be stored.  This database must already have been created         //
      39  // and a username/password created to access it.                         //
      40  
      41  $CFG->dbtype    = 'pgsql';      // 'pgsql', 'mariadb', 'mysqli', 'sqlsrv' or 'oci'
      42  $CFG->dblibrary = 'native';     // 'native' only at the moment
      43  $CFG->dbhost    = 'localhost';  // eg 'localhost' or 'db.isp.com' or IP
      44  $CFG->dbname    = 'moodle';     // database name, eg moodle
      45  $CFG->dbuser    = 'username';   // your database username
      46  $CFG->dbpass    = 'password';   // your database password
      47  $CFG->prefix    = 'mdl_';       // prefix to use for all table names
      48  $CFG->dboptions = array(
      49      'dbpersist' => false,       // should persistent database connections be
      50                                  //  used? set to 'false' for the most stable
      51                                  //  setting, 'true' can improve performance
      52                                  //  sometimes
      53      'dbsocket'  => false,       // should connection via UNIX socket be used?
      54                                  //  if you set it to 'true' or custom path
      55                                  //  here set dbhost to 'localhost',
      56                                  //  (please note mysql is always using socket
      57                                  //  if dbhost is 'localhost' - if you need
      58                                  //  local port connection use '127.0.0.1')
      59      'dbport'    => '',          // the TCP port number to use when connecting
      60                                  //  to the server. keep empty string for the
      61                                  //  default port
      62      'dbhandlesoptions' => false,// On PostgreSQL poolers like pgbouncer don't
      63                                  // support advanced options on connection.
      64                                  // If you set those in the database then
      65                                  // the advanced settings will not be sent.
      66      'dbcollation' => 'utf8mb4_unicode_ci', // MySQL has partial and full UTF-8
      67                                  // support. If you wish to use partial UTF-8
      68                                  // (three bytes) then set this option to
      69                                  // 'utf8_unicode_ci', otherwise this option
      70                                  // can be removed for MySQL (by default it will
      71                                  // use 'utf8mb4_unicode_ci'. This option should
      72                                  // be removed for all other databases.
      73      // 'fetchbuffersize' => 100000, // On PostgreSQL, this option sets a limit
      74                                  // on the number of rows that are fetched into
      75                                  // memory when doing a large recordset query
      76                                  // (e.g. search indexing). Default is 100000.
      77                                  // Uncomment and set to a value to change it,
      78                                  // or zero to turn off the limit. You need to
      79                                  // set to zero if you are using pg_bouncer in
      80                                  // 'transaction' mode (it is fine in 'session'
      81                                  // mode).
      82      /*
      83      'connecttimeout' => null, // Set connect timeout in seconds. Not all drivers support it.
      84      'readonly' => [          // Set to read-only slave details, to get safe reads
      85                               // from there instead of the master node. Optional.
      86                               // Currently supported by pgsql and mysqli variety classes.
      87                               // If not supported silently ignored.
      88        'instance' => [        // Readonly slave connection parameters
      89          [
      90            'dbhost' => 'slave.dbhost',
      91            'dbport' => '',    // Defaults to master port
      92            'dbuser' => '',    // Defaults to master user
      93            'dbpass' => '',    // Defaults to master password
      94          ],
      95          [...],
      96        ],
      97  
      98      Instance(s) can alternatively be specified as:
      99  
     100        'instance' => 'slave.dbhost',
     101        'instance' => ['slave.dbhost1', 'slave.dbhost2'],
     102        'instance' => ['dbhost' => 'slave.dbhost', 'dbport' => '', 'dbuser' => '', 'dbpass' => ''],
     103  
     104        'connecttimeout' => 2, // Set read-only slave connect timeout in seconds. See above.
     105        'latency' => 0.5,      // Set read-only slave sync latency in seconds.
     106                               // When 'latency' seconds have lapsed after an update to a table
     107                               // it is deemed safe to use readonly slave for reading from the table.
     108                               // It is optional. If omitted once written to a table it will always
     109                               // use master handle for reading.
     110                               // Lower values increase the performance, but setting it too low means
     111                               // missing the master-slave sync.
     112        'exclude_tables' => [  // Tables to exclude from read-only slave feature.
     113            'table1',          // Should not be used, unless in rare cases when some area of the system
     114            'table2',          // is malfunctioning and you still want to use readonly feature.
     115        ],                     // Then one can exclude offending tables while investigating.
     116  
     117      More info available in lib/dml/moodle_read_slave_trait.php where the feature is implemented.
     118      ]
     119       */
     120  // For all database config settings see https://docs.moodle.org/en/Database_settings
     121  );
     122  
     123  
     124  //=========================================================================
     125  // 2. WEB SITE LOCATION
     126  //=========================================================================
     127  // Now you need to tell Moodle where it is located. Specify the full
     128  // web address to where moodle has been installed.  If your web site
     129  // is accessible via multiple URLs then choose the most natural one
     130  // that your students would use.  Do not include a trailing slash
     131  //
     132  // If you need both intranet and Internet access please read
     133  // http://docs.moodle.org/en/masquerading
     134  
     135  $CFG->wwwroot   = 'http://example.com/moodle';
     136  
     137  
     138  //=========================================================================
     139  // 3. DATA FILES LOCATION
     140  //=========================================================================
     141  // Now you need a place where Moodle can save uploaded files.  This
     142  // directory should be readable AND WRITEABLE by the web server user
     143  // (usually 'nobody' or 'apache'), but it should not be accessible
     144  // directly via the web.
     145  //
     146  // - On hosting systems you might need to make sure that your "group" has
     147  //   no permissions at all, but that "others" have full permissions.
     148  //
     149  // - On Windows systems you might specify something like 'c:\moodledata'
     150  
     151  $CFG->dataroot  = '/home/example/moodledata';
     152  
     153  
     154  //=========================================================================
     155  // 4. DATA FILES PERMISSIONS
     156  //=========================================================================
     157  // The following parameter sets the permissions of new directories
     158  // created by Moodle within the data directory.  The format is in
     159  // octal format (as used by the Unix utility chmod, for example).
     160  // The default is usually OK, but you may want to change it to 0750
     161  // if you are concerned about world-access to the files (you will need
     162  // to make sure the web server process (eg Apache) can access the files.
     163  // NOTE: the prefixed 0 is important, and don't use quotes.
     164  
     165  $CFG->directorypermissions = 02777;
     166  
     167  
     168  //=========================================================================
     169  // 5. DIRECTORY LOCATION  (most people can just ignore this setting)
     170  //=========================================================================
     171  // A very few webhosts use /admin as a special URL for you to access a
     172  // control panel or something.  Unfortunately this conflicts with the
     173  // standard location for the Moodle admin pages.  You can work around this
     174  // by renaming the admin directory in your installation, and putting that
     175  // new name here.  eg "moodleadmin".  This should fix all admin links in Moodle.
     176  // After any change you need to visit your new admin directory
     177  // and purge all caches.
     178  
     179  $CFG->admin = 'admin';
     180  
     181  
     182  //=========================================================================
     183  // 6. OTHER MISCELLANEOUS SETTINGS (ignore these for new installations)
     184  //=========================================================================
     185  //
     186  // These are additional tweaks for which no GUI exists in Moodle yet.
     187  //
     188  // Starting in PHP 5.3 administrators should specify default timezone
     189  // in PHP.ini, you can also specify it here if needed.
     190  // See details at: http://php.net/manual/en/function.date-default-timezone-set.php
     191  // List of time zones at: http://php.net/manual/en/timezones.php
     192  //     date_default_timezone_set('Australia/Perth');
     193  //
     194  // Change the key pair lifetime for Moodle Networking
     195  // The default is 28 days. You would only want to change this if the key
     196  // was not getting regenerated for any reason. You would probably want
     197  // make it much longer. Note that you'll need to delete and manually update
     198  // any existing key.
     199  //      $CFG->mnetkeylifetime = 28;
     200  //
     201  // Not recommended: Set the following to true to allow the use
     202  // off non-Moodle standard characters in usernames.
     203  //      $CFG->extendedusernamechars = true;
     204  //
     205  // Allow user passwords to be included in backup files. Very dangerous
     206  // setting as far as it publishes password hashes that can be unencrypted
     207  // if the backup file is publicy available. Use it only if you can guarantee
     208  // that all your backup files remain only privacy available and are never
     209  // shared out from your site/institution!
     210  //      $CFG->includeuserpasswordsinbackup = true;
     211  //
     212  // Completely disable user creation when restoring a course, bypassing any
     213  // permissions granted via roles and capabilities. Enabling this setting
     214  // results in the restore process stopping when a user attempts to restore a
     215  // course requiring users to be created.
     216  //     $CFG->disableusercreationonrestore = true;
     217  //
     218  // Keep the temporary directories used by backup and restore without being
     219  // deleted at the end of the process. Use it if you want to debug / view
     220  // all the information stored there after the process has ended. Note that
     221  // those directories may be deleted (after some ttl) both by cron and / or
     222  // by new backup / restore invocations.
     223  //     $CFG->keeptempdirectoriesonbackup = true;
     224  //
     225  // Modify the restore process in order to force the "user checks" to assume
     226  // that the backup originated from a different site, so detection of matching
     227  // users is performed with different (more "relaxed") rules. Note that this is
     228  // only useful if the backup file has been created using Moodle < 1.9.4 and the
     229  // site has been rebuilt from scratch using backup files (not the best way btw).
     230  // If you obtain user conflicts on restore, rather than enabling this setting
     231  // permanently, try restoring the backup on a different site, back it up again
     232  // and then restore on the target server.
     233  //    $CFG->forcedifferentsitecheckingusersonrestore = true;
     234  //
     235  // Force the backup system to continue to create backups in the legacy zip
     236  // format instead of the new tgz format. Does not affect restore, which
     237  // auto-detects the underlying file format.
     238  //    $CFG->usezipbackups = true;
     239  //
     240  // Prevent stats processing and hide the GUI
     241  //      $CFG->disablestatsprocessing = true;
     242  //
     243  // Setting this to true will enable admins to edit any post at any time
     244  //      $CFG->admineditalways = true;
     245  //
     246  // These variables define DEFAULT block variables for new courses
     247  // If this one is set it overrides all others and is the only one used.
     248  //      $CFG->defaultblocks_override = 'activity_modules,search_forums,course_list:news_items,calendar_upcoming,recent_activity';
     249  //
     250  // These variables define the specific settings for defined course formats.
     251  // They override any settings defined in the formats own config file.
     252  //      $CFG->defaultblocks_site = 'site_main_menu,course_list:course_summary,calendar_month';
     253  //      $CFG->defaultblocks_social = 'search_forums,calendar_month,calendar_upcoming,social_activities,recent_activity,course_list';
     254  //      $CFG->defaultblocks_topics = 'activity_modules,search_forums,course_list:news_items,calendar_upcoming,recent_activity';
     255  //      $CFG->defaultblocks_weeks = 'activity_modules,search_forums,course_list:news_items,calendar_upcoming,recent_activity';
     256  //
     257  // These blocks are used when no other default setting is found.
     258  //      $CFG->defaultblocks = 'activity_modules,search_forums,course_list:news_items,calendar_upcoming,recent_activity';
     259  //
     260  // You can specify a different class to be created for the $PAGE global, and to
     261  // compute which blocks appear on each page. However, I cannot think of any good
     262  // reason why you would need to change that. It just felt wrong to hard-code the
     263  // the class name. You are strongly advised not to use these to settings unless
     264  // you are absolutely sure you know what you are doing.
     265  //      $CFG->moodlepageclass = 'moodle_page';
     266  //      $CFG->moodlepageclassfile = "$CFG->dirroot/local/myplugin/mypageclass.php";
     267  //      $CFG->blockmanagerclass = 'block_manager';
     268  //      $CFG->blockmanagerclassfile = "$CFG->dirroot/local/myplugin/myblockamanagerclass.php";
     269  //
     270  // Seconds for files to remain in caches. Decrease this if you are worried
     271  // about students being served outdated versions of uploaded files.
     272  //     $CFG->filelifetime = 60*60*6;
     273  //
     274  // Some web servers can offload the file serving from PHP process,
     275  // comment out one the following options to enable it in Moodle:
     276  //     $CFG->xsendfile = 'X-Sendfile';           // Apache {@see https://tn123.org/mod_xsendfile/}
     277  //     $CFG->xsendfile = 'X-LIGHTTPD-send-file'; // Lighttpd {@see http://redmine.lighttpd.net/projects/lighttpd/wiki/X-LIGHTTPD-send-file}
     278  //     $CFG->xsendfile = 'X-Accel-Redirect';     // Nginx {@see http://wiki.nginx.org/XSendfile}
     279  // If your X-Sendfile implementation (usually Nginx) uses directory aliases specify them
     280  // in the following array setting:
     281  //     $CFG->xsendfilealiases = array(
     282  //         '/dataroot/' => $CFG->dataroot,
     283  //         '/cachedir/' => '/var/www/moodle/cache',    // for custom $CFG->cachedir locations
     284  //         '/localcachedir/' => '/var/local/cache',    // for custom $CFG->localcachedir locations
     285  //         '/tempdir/'  => '/var/www/moodle/temp',     // for custom $CFG->tempdir locations
     286  //         '/filedir'   => '/var/www/moodle/filedir',  // for custom $CFG->filedir locations
     287  //     );
     288  //
     289  // YUI caching may be sometimes improved by slasharguments:
     290  //     $CFG->yuislasharguments = 1;
     291  // Some servers may need a special rewrite rule to work around internal path length limitations:
     292  // RewriteRule (^.*/theme/yui_combo\.php)(/.*) $1?file=$2
     293  //
     294  //
     295  // Following settings may be used to select session driver, uncomment only one of the handlers.
     296  //   Database session handler (not compatible with MyISAM):
     297  //      $CFG->session_handler_class = '\core\session\database';
     298  //      $CFG->session_database_acquire_lock_timeout = 120;
     299  //
     300  //   File session handler (file system locking required):
     301  //      $CFG->session_handler_class = '\core\session\file';
     302  //      $CFG->session_file_save_path = $CFG->dataroot.'/sessions';
     303  //
     304  //   Memcached session handler (requires memcached server and extension):
     305  //      $CFG->session_handler_class = '\core\session\memcached';
     306  //      $CFG->session_memcached_save_path = '127.0.0.1:11211';
     307  //      $CFG->session_memcached_prefix = 'memc.sess.key.';
     308  //      $CFG->session_memcached_acquire_lock_timeout = 120;
     309  //      $CFG->session_memcached_lock_expire = 7200;       // Ignored if PECL memcached is below version 2.2.0
     310  //      $CFG->session_memcached_lock_retry_sleep = 150;   // Spin-lock retry sleeptime (msec). Only effective
     311  //                                                        // for tuning php-memcached 3.0.x (PHP 7)
     312  //
     313  //   Redis session handler (requires redis server and redis extension):
     314  //      $CFG->session_handler_class = '\core\session\redis';
     315  //      $CFG->session_redis_host = '127.0.0.1';
     316  //      $CFG->session_redis_port = 6379;  // Optional.
     317  //      $CFG->session_redis_database = 0;  // Optional, default is db 0.
     318  //      $CFG->session_redis_auth = ''; // Optional, default is don't set one.
     319  //      $CFG->session_redis_prefix = ''; // Optional, default is don't set one.
     320  //      $CFG->session_redis_acquire_lock_timeout = 120;
     321  //      $CFG->session_redis_lock_expire = 7200;
     322  //      $CFG->session_redis_lock_retry = 100; // Optional wait between lock attempts in ms, default is 100.
     323  //                                            // After 5 seconds it will throttle down to once per second.
     324  //      Use the igbinary serializer instead of the php default one. Note that phpredis must be compiled with
     325  //      igbinary support to make the setting to work. Also, if you change the serializer you have to flush the database!
     326  //      $CFG->session_redis_serializer_use_igbinary = false; // Optional, default is PHP builtin serializer.
     327  //
     328  // Please be aware that when selecting Memcached for sessions that it is advised to use a dedicated
     329  // memcache server. The memcached extension does not provide isolated environments for individual uses.
     330  // Using the same server for other purposes (MUC for example) can lead to sessions being prematurely removed should
     331  // the other uses of the server purge the cache.
     332  //
     333  // Following setting allows you to alter how frequently is timemodified updated in sessions table.
     334  //      $CFG->session_update_timemodified_frequency = 20; // In seconds.
     335  //
     336  // If this setting is set to true, then Moodle will track the IP of the
     337  // current user to make sure it hasn't changed during a session.  This
     338  // will prevent the possibility of sessions being hijacked via XSS, but it
     339  // may break things for users coming using proxies that change all the time,
     340  // like AOL.
     341  //      $CFG->tracksessionip = true;
     342  //
     343  // The following lines are for handling email bounces.
     344  //      $CFG->handlebounces = true;
     345  //      $CFG->minbounces = 10;
     346  //      $CFG->bounceratio = .20;
     347  // The next lines are needed both for bounce handling and any other email to module processing.
     348  // mailprefix must be EXACTLY four characters.
     349  // Uncomment and customise this block for Postfix
     350  //      $CFG->mailprefix = 'mdl+'; // + is the separator for Exim and Postfix.
     351  //      $CFG->mailprefix = 'mdl-'; // - is the separator for qmail
     352  //      $CFG->maildomain = 'youremaildomain.com';
     353  //
     354  // Enable when setting up advanced reverse proxy load balancing configurations,
     355  // it may be also necessary to enable this when using port forwarding.
     356  //      $CFG->reverseproxy = true;
     357  //
     358  // Enable when using external SSL appliance for performance reasons.
     359  // Please note that site may be accessible via http: or https:, but not both!
     360  //      $CFG->sslproxy = true;
     361  //
     362  // This setting will cause the userdate() function not to fix %d in
     363  // date strings, and just let them show with a zero prefix.
     364  //      $CFG->nofixday = true;
     365  //
     366  // This setting will make some graphs (eg user logs) use lines instead of bars
     367  //      $CFG->preferlinegraphs = true;
     368  //
     369  // This setting allows you to specify a class to rewrite outgoing urls
     370  // enabling 'clean urls' in conjunction with an apache / nginx handler.
     371  // The handler must implement \core\output\url_rewriter.
     372  //      $CFG->urlrewriteclass = '\local_cleanurls\url_rewriter';
     373  //
     374  // Enabling this will allow custom scripts to replace existing moodle scripts.
     375  // For example: if $CFG->customscripts/course/view.php exists then
     376  // it will be used instead of $CFG->wwwroot/course/view.php
     377  // At present this will only work for files that include config.php and are called
     378  // as part of the url (index.php is implied).
     379  // Some examples are:
     380  //      http://my.moodle.site/course/view.php
     381  //      http://my.moodle.site/index.php
     382  //      http://my.moodle.site/admin            (index.php implied)
     383  // Custom scripts should not include config.php
     384  // Warning: Replacing standard moodle scripts may pose security risks and/or may not
     385  // be compatible with upgrades. Use this option only if you are aware of the risks
     386  // involved.
     387  // Specify the full directory path to the custom scripts
     388  //      $CFG->customscripts = '/home/example/customscripts';
     389  //
     390  // Performance profiling
     391  //
     392  //   If you set Debug to "Yes" in the Configuration->Variables page some
     393  //   performance profiling data will show up on your footer (in default theme).
     394  //   With these settings you get more granular control over the capture
     395  //   and printout of the data
     396  //
     397  //   Capture performance profiling data
     398  //   define('MDL_PERF'  , true);
     399  //
     400  //   Capture additional data from DB
     401  //   define('MDL_PERFDB'  , true);
     402  //
     403  //   Print to log (for passive profiling of production servers)
     404  //   define('MDL_PERFTOLOG'  , true);
     405  //
     406  //   Print to footer (works with the default theme)
     407  //   define('MDL_PERFTOFOOT', true);
     408  //
     409  //   Enable earlier profiling that causes more code to be covered
     410  //   on every request (db connections, config load, other inits...).
     411  //   Requires extra configuration to be defined in config.php like:
     412  //   profilingincluded, profilingexcluded, profilingautofrec,
     413  //   profilingallowme, profilingallowall, profilinglifetime
     414  //       $CFG->earlyprofilingenabled = true;
     415  //
     416  // Disable database storage for profile data.
     417  // When using an exernal plugin to store profiling data it is often
     418  // desirable to not store the data in the database.
     419  //
     420  //      $CFG->disableprofilingtodatabase = true;
     421  //
     422  // Force displayed usernames
     423  //   A little hack to anonymise user names for all students.  If you set these
     424  //   then all non-teachers will always see these for every person.
     425  //       $CFG->forcefirstname = 'Bruce';
     426  //       $CFG->forcelastname  = 'Simpson';
     427  //
     428  // The following setting will turn on username logging into Apache log. For full details regarding setting
     429  // up of this function please refer to the install section of the document.
     430  //     $CFG->apacheloguser = 0; // Turn this feature off. Default value.
     431  //     $CFG->apacheloguser = 1; // Log user id.
     432  //     $CFG->apacheloguser = 2; // Log full name in cleaned format. ie, Darth Vader will be displayed as darth_vader.
     433  //     $CFG->apacheloguser = 3; // Log username.
     434  // To get the values logged in Apache's log, add to your httpd.conf
     435  // the following statements. In the General part put:
     436  //     LogFormat "%h %l %{MOODLEUSER}n %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\"" moodleformat
     437  // And in the part specific to your Moodle install / virtualhost:
     438  //     CustomLog "/your/path/to/log" moodleformat
     439  //
     440  // Alternatively for other webservers such as nginx, you can instead have the username sent via a http header
     441  // 'X-MOODLEUSER' which can be saved in the logfile and then stripped out before being sent to the browser:
     442  //     $CFG->headerloguser = 0; // Turn this feature off. Default value.
     443  //     $CFG->headerloguser = 1; // Log user id.
     444  //     $CFG->headerloguser = 2; // Log full name in cleaned format. ie, Darth Vader will be displayed as darth_vader.
     445  //     $CFG->headerloguser = 3; // Log username.
     446  //
     447  // CAUTION: Use of this option will expose usernames in the Apache / nginx log,
     448  // If you are going to publish your log, or the output of your web stats analyzer
     449  // this will weaken the security of your website.
     450  //
     451  // Email database connection errors to someone.  If Moodle cannot connect to the
     452  // database, then email this address with a notice.
     453  //
     454  //     $CFG->emailconnectionerrorsto = 'your@emailaddress.com';
     455  //
     456  // Set the priority of themes from highest to lowest. This is useful (for
     457  // example) in sites where the user theme should override all other theme
     458  // settings for accessibility reasons. You can also disable types of themes
     459  // (other than site)  by removing them from the array. The default setting is:
     460  //
     461  //     $CFG->themeorder = array('course', 'category', 'session', 'user', 'cohort', 'site');
     462  //
     463  // NOTE: course, category, session, user, cohort themes still require the
     464  // respective settings to be enabled
     465  //
     466  // It is possible to add extra themes directory stored outside of $CFG->dirroot.
     467  // This local directory does not have to be accessible from internet.
     468  //
     469  //     $CFG->themedir = '/location/of/extra/themes';
     470  //
     471  // It is possible to specify different cache and temp directories, use local fast filesystem
     472  // for normal web servers. Server clusters MUST use shared filesystem for cachedir!
     473  // Localcachedir is intended for server clusters, it does not have to be shared by cluster nodes.
     474  // The directories must not be accessible via web.
     475  //
     476  //     $CFG->tempdir = '/var/www/moodle/temp';        // Directory MUST BE SHARED by all cluster nodes.
     477  //     $CFG->cachedir = '/var/www/moodle/cache';      // Directory MUST BE SHARED by all cluster nodes, locking required.
     478  //     $CFG->localcachedir = '/var/local/cache';      // Intended for local node caching.
     479  //
     480  // It is possible to specify a different backup temp directory, use local fast filesystem
     481  // for normal web servers. Server clusters MUST use shared filesystem for backuptempdir!
     482  // The directory must not be accessible via web.
     483  //
     484  //     $CFG->backuptempdir = '/var/www/moodle/backuptemp';  // Directory MUST BE SHARED by all cluster nodes.
     485  //
     486  // Some filesystems such as NFS may not support file locking operations.
     487  // Locking resolves race conditions and is strongly recommended for production servers.
     488  //     $CFG->preventfilelocking = false;
     489  //
     490  // Site default language can be set via standard administration interface. If you
     491  // want to have initial error messages for eventual database connection problems
     492  // localized too, you have to set your language code here.
     493  //
     494  //     $CFG->lang = 'yourlangcode'; // for example 'cs'
     495  //
     496  // When Moodle is about to perform an intensive operation it raises PHP's memory
     497  // limit. The following setting should be used on large sites to set the raised
     498  // memory limit to something higher.
     499  // The value for the settings should be a valid PHP memory value. e.g. 512M, 1G
     500  //
     501  //     $CFG->extramemorylimit = '1024M';
     502  //
     503  // Moodle 2.4 introduced a new cache API.
     504  // The cache API stores a configuration file within the Moodle data directory and
     505  // uses that rather than the database in order to function in a stand-alone manner.
     506  // Using altcacheconfigpath you can change the location where this config file is
     507  // looked for.
     508  // It can either be a directory in which to store the file, or the full path to the
     509  // file if you want to take full control. Either way it must be writable by the
     510  // webserver.
     511  //
     512  //     $CFG->altcacheconfigpath = '/var/www/shared/moodle.cache.config.php
     513  //
     514  // Use the following flag to completely disable the Available update notifications
     515  // feature and hide it from the server administration UI.
     516  //
     517  //      $CFG->disableupdatenotifications = true;
     518  //
     519  // Use the following flag to completely disable the installation of plugins
     520  // (new plugins, available updates and missing dependencies) and related
     521  // features (such as cancelling the plugin installation or upgrade) via the
     522  // server administration web interface.
     523  //
     524  //      $CFG->disableupdateautodeploy = true;
     525  //
     526  // Use the following flag to disable the warning on the system notifications page
     527  // about present development libraries. This flag will not disable the warning within
     528  // the security overview report. Use this flag only if you really have prohibited web
     529  // access to the development libraries in your webserver configuration.
     530  //
     531  //      $CFG->disabledevlibdirscheck = true;
     532  //
     533  // Use the following flag to disable modifications to scheduled tasks
     534  // whilst still showing the state of tasks.
     535  //
     536  //      $CFG->preventscheduledtaskchanges = true;
     537  //
     538  // As of version 2.4 Moodle serves icons as SVG images if the users browser appears
     539  // to support SVG.
     540  // For those wanting to control the serving of SVG images the following setting can
     541  // be defined in your config.php.
     542  // If it is not defined then the default (browser detection) will occur.
     543  //
     544  // To ensure they are always used when available:
     545  //      $CFG->svgicons = true;
     546  //
     547  // To ensure they are never used even when available:
     548  //      $CFG->svgicons = false;
     549  //
     550  // Some administration options allow setting the path to executable files. This can
     551  // potentially cause a security risk. Set this option to true to disable editing
     552  // those config settings via the web. They will need to be set explicitly in the
     553  // config.php file
     554  //      $CFG->preventexecpath = true;
     555  //
     556  // Use the following flag to set userid for noreply user. If not set then moodle will
     557  // create dummy user and use -ve value as user id.
     558  //      $CFG->noreplyuserid = -10;
     559  //
     560  // As of version 2.6 Moodle supports admin to set support user. If not set, all mails
     561  // will be sent to supportemail.
     562  //      $CFG->supportuserid = -20;
     563  //
     564  // Moodle 2.7 introduces a locking api for critical tasks (e.g. cron).
     565  // The default locking system to use is DB locking for Postgres, MySQL, MariaDB and
     566  // file locking for Oracle and SQLServer. If $CFG->preventfilelocking is set, then the
     567  // default will always be DB locking. It can be manually set to one of the lock
     568  // factory classes listed below, or one of your own custom classes implementing the
     569  // \core\lock\lock_factory interface.
     570  //
     571  //      $CFG->lock_factory = "auto";
     572  //
     573  // The list of available lock factories is:
     574  //
     575  // "\\core\\lock\\file_lock_factory" - File locking
     576  //      Uses lock files stored by default in the dataroot. Whether this
     577  //      works on clusters depends on the file system used for the dataroot.
     578  //
     579  // "\\core\\lock\\db_record_lock_factory" - DB locking based on table rows.
     580  //
     581  // "\\core\\lock\\mysql_lock_factory" - DB locking based on MySQL / MariaDB locks.
     582  //
     583  // "\\core\\lock\\postgres_lock_factory" - DB locking based on postgres advisory locks.
     584  //
     585  // Settings used by the lock factories
     586  //
     587  // Location for lock files used by the File locking factory. This must exist
     588  // on a shared file system that supports locking.
     589  //      $CFG->file_lock_root = $CFG->dataroot . '/lock';
     590  //
     591  //
     592  // Alternative task logging.
     593  // Since Moodle 3.7 the output of al scheduled and adhoc tasks is stored in the database and it is possible to use an
     594  // alternative task logging mechanism.
     595  // To set the alternative task logging mechanism in config.php you can use the following settings, providing the
     596  // alternative class name that will be auto-loaded.
     597  //
     598  //      $CFG->task_log_class = '\\local_mytasklogger\\logger';
     599  //
     600  // Moodle 2.9 allows administrators to customise the list of supported file types.
     601  // To add a new filetype or override the definition of an existing one, set the
     602  // customfiletypes variable like this:
     603  //
     604  // $CFG->customfiletypes = array(
     605  //     (object)array(
     606  //         'extension' => 'frog',
     607  //         'icon' => 'archive',
     608  //         'type' => 'application/frog',
     609  //         'customdescription' => 'Amphibian-related file archive'
     610  //     )
     611  // );
     612  //
     613  // The extension, icon, and type fields are required. The icon field can refer to
     614  // any icon inside the pix/f folder. You can also set the customdescription field
     615  // (shown above) and (for advanced use) the groups, string, and defaulticon fields.
     616  //
     617  // Upgrade key
     618  //
     619  // If the upgrade key is defined here, then the value must be provided every time
     620  // the site is being upgraded though the web interface, regardless of whether the
     621  // administrator is logged in or not. This prevents anonymous access to the upgrade
     622  // screens where the real authentication and authorization mechanisms can not be
     623  // relied on.
     624  //
     625  // It is strongly recommended to use a value different from your real account
     626  // password.
     627  //
     628  //      $CFG->upgradekey = 'put_some_password-like_value_here';
     629  //
     630  // Document conversion limit
     631  //
     632  // How many times the background task should attempt to convert a given attempt
     633  // before removing it from the queue. Currently this limit is only used by the
     634  // mod_assign conversion task.
     635  //
     636  //      $CFG->conversionattemptlimit = 3;
     637  //
     638  // Font used in exported PDF files. When generating a PDF, Moodle embeds a subset of
     639  // the font in the PDF file so it will be readable on the widest range of devices.
     640  // The default font is 'freesans' which is part of the GNU FreeFont collection.
     641  //
     642  //      $CFG->pdfexportfont = 'freesans';
     643  //
     644  // Use the following flag to enable messagingallusers and set the default preference
     645  // value for existing users to allow them to be contacted by other site users.
     646  //
     647  //      $CFG->keepmessagingallusersenabled = true;
     648  //
     649  // Disable login token validation for login pages. Login token validation is enabled
     650  // by default unless $CFG->alternateloginurl is set.
     651  //
     652  //      $CFG->disablelogintoken = true;
     653  //
     654  // Moodle 3.7+ checks that cron is running frequently. If the time between cron runs
     655  // is greater than this value (in seconds), you get a warning on the admin page. (This
     656  // setting only controls whether or not the warning appears, it has no other effect.)
     657  //
     658  //      $CFG->expectedcronfrequency = 200;
     659  //
     660  // Moodle 3.9+ checks how old tasks are in the ad hoc queue and warns at 10 minutes
     661  // and errors at 4 hours. Set these to override these limits:
     662  //
     663  //      $CFG->adhoctaskagewarn = 10 * 60;
     664  //      $CFG->adhoctaskageerror = 4 * 60 * 60;
     665  //
     666  // Session lock warning threshold. Long running pages should release the session using \core\session\manager::write_close().
     667  // Set this threshold to any value greater than 0 to add developer warnings when a page locks the session for too long.
     668  // The session should rarely be locked for more than 1 second. The input should be in seconds and may be a float.
     669  //
     670  //      $CFG->debugsessionlock = 5;
     671  //
     672  // There are times when a session lock is not required during a request. For a page/service to opt-in whether or not a
     673  // session lock is required this setting must first be set to 'true'.
     674  // This is an experimental issue. The session store can not be in the session, please
     675  // see https://docs.moodle.org/en/Session_handling#Read_only_sessions.
     676  //
     677  //      $CFG->enable_read_only_sessions = true;
     678  //
     679  // Uninstall plugins from CLI only. This stops admins from uninstalling plugins from the graphical admin
     680  // user interface, and forces plugins to be uninstalled from the Command Line tool only, found at
     681  // admin/cli/plugin_uninstall.php.
     682  //
     683  //      $CFG->uninstallclionly = true;
     684  //
     685  //
     686  // Customise question bank display
     687  //
     688  // The display of Moodle's question bank is made up of a number of columns.
     689  // You can customise this display by giving a comma-separated list of column class
     690  // names here. Each class must be a subclass of \core_question\bank\column_base.
     691  // For example you might define a class like
     692  //      class \local_qbank_extensions\my_column extends \core_question\bank\column_base
     693  // in a local plugin, then add it to the list here. At the time of writing,
     694  // the default question bank display is equivalent to the following, but you  might like
     695  // to check the latest default in question/classes/bank/view.php before setting this.
     696  //
     697  //      $CFG->questionbankcolumns = 'checkbox_column,question_type_column,'
     698  //              . 'question_name_idnumber_tags_column,edit_menu_column,'
     699  //              . 'tags_action_column,edit_action_column,copy_action_column,'
     700  //              . 'preview_action_column,delete_action_column,export_xml_action_column,'
     701  //              . 'creator_name_column,modifier_name_column';
     702  //
     703  // Forum summary report
     704  //
     705  // In order for the forum summary report to calculate word count and character count data, those details are now stored
     706  // for each post in the database when posts are created or updated. For posts that existed prior to a Moodle 3.8 upgrade,
     707  // these are calculated by the refresh_forum_post_counts ad-hoc task in chunks of 5000 posts per batch by default.
     708  // That default can be overridden by setting an integer value for $CFG->forumpostcountchunksize.
     709  //
     710  //      $CFG->forumpostcountchunksize = 5000;
     711  //
     712  //=========================================================================
     713  // 7. SETTINGS FOR DEVELOPMENT SERVERS - not intended for production use!!!
     714  //=========================================================================
     715  //
     716  // Force a debugging mode regardless the settings in the site administration
     717  // @error_reporting(E_ALL | E_STRICT); // NOT FOR PRODUCTION SERVERS!
     718  // @ini_set('display_errors', '1');    // NOT FOR PRODUCTION SERVERS!
     719  // $CFG->debug = (E_ALL | E_STRICT);   // === DEBUG_DEVELOPER - NOT FOR PRODUCTION SERVERS!
     720  // $CFG->debugdisplay = 1;             // NOT FOR PRODUCTION SERVERS!
     721  //
     722  // You can specify a comma separated list of user ids that that always see
     723  // debug messages, this overrides the debug flag in $CFG->debug and $CFG->debugdisplay
     724  // for these users only.
     725  // $CFG->debugusers = '2';
     726  //
     727  // Prevent theme caching
     728  // $CFG->themedesignermode = true; // NOT FOR PRODUCTION SERVERS!
     729  //
     730  // Enable verbose debug information during fetching of email messages from IMAP server.
     731  // $CFG->debugimap = true;
     732  //
     733  // Enable verbose debug information during sending of email messages to SMTP server.
     734  // Note: also requires $CFG->debug set to DEBUG_DEVELOPER.
     735  // $CFG->debugsmtp = true;
     736  //
     737  // Prevent JS caching
     738  // $CFG->cachejs = false; // NOT FOR PRODUCTION SERVERS!
     739  //
     740  // Prevent Template caching
     741  // $CFG->cachetemplates = false; // NOT FOR PRODUCTION SERVERS!
     742  //
     743  // Restrict which YUI logging statements are shown in the browser console.
     744  // For details see the upstream documentation:
     745  //   http://yuilibrary.com/yui/docs/api/classes/config.html#property_logInclude
     746  //   http://yuilibrary.com/yui/docs/api/classes/config.html#property_logExclude
     747  // $CFG->yuiloginclude = array(
     748  //     'moodle-course-categoryexpander' => true,
     749  // );
     750  // $CFG->yuilogexclude = array(
     751  //     'moodle-core-notification' => true,
     752  // );
     753  //
     754  // Set the minimum log level for YUI logging statements.
     755  // For details see the upstream documentation:
     756  //   http://yuilibrary.com/yui/docs/api/classes/config.html#property_logLevel
     757  // $CFG->yuiloglevel = 'debug';
     758  //
     759  // Prevent core_string_manager application caching
     760  // $CFG->langstringcache = false; // NOT FOR PRODUCTION SERVERS!
     761  //
     762  // When working with production data on test servers, no emails or other messages
     763  // should ever be send to real users
     764  // $CFG->noemailever = true;    // NOT FOR PRODUCTION SERVERS!
     765  //
     766  // Divert all outgoing emails to this address to test and debug emailing features
     767  // $CFG->divertallemailsto = 'root@localhost.local'; // NOT FOR PRODUCTION SERVERS!
     768  //
     769  // Except for certain email addresses you want to let through for testing. Accepts
     770  // a comma separated list of regexes.
     771  // $CFG->divertallemailsexcept = 'tester@dev.com, fred(\+.*)?@example.com'; // NOT FOR PRODUCTION SERVERS!
     772  //
     773  // Uncomment if you want to allow empty comments when modifying install.xml files.
     774  // $CFG->xmldbdisablecommentchecking = true;    // NOT FOR PRODUCTION SERVERS!
     775  //
     776  // Since 2.0 sql queries are not shown during upgrade by default.
     777  // Please note that this setting may produce very long upgrade page on large sites.
     778  // $CFG->upgradeshowsql = true; // NOT FOR PRODUCTION SERVERS!
     779  //
     780  // Add SQL queries to the output of cron, just before their execution
     781  // $CFG->showcronsql = true;
     782  //
     783  // Force developer level debug and add debug info to the output of cron
     784  // $CFG->showcrondebugging = true;
     785  //
     786  // Force result of checks used to determine whether a site is considered "public" or not (such as for site registration).
     787  // $CFG->site_is_public = false;
     788  //
     789  //=========================================================================
     790  // 8. FORCED SETTINGS
     791  //=========================================================================
     792  // It is possible to specify normal admin settings here, the point is that
     793  // they can not be changed through the standard admin settings pages any more.
     794  //
     795  // Core settings are specified directly via assignment to $CFG variable.
     796  // Example:
     797  //   $CFG->somecoresetting = 'value';
     798  //
     799  // Plugin settings have to be put into a special array.
     800  // Example:
     801  //   $CFG->forced_plugin_settings = array('pluginname'  => array('settingname' => 'value', 'secondsetting' => 'othervalue'),
     802  //                                        'otherplugin' => array('mysetting' => 'myvalue', 'thesetting' => 'thevalue'));
     803  // Module default settings with advanced/locked checkboxes can be set too. To do this, add
     804  // an extra config with '_adv' or '_locked' as a suffix and set the value to true or false.
     805  // Example:
     806  //   $CFG->forced_plugin_settings = array('pluginname'  => array('settingname' => 'value', 'settingname_locked' => true, 'settingname_adv' => true));
     807  //
     808  //=========================================================================
     809  // 9. PHPUNIT SUPPORT
     810  //=========================================================================
     811  // $CFG->phpunit_prefix = 'phpu_';
     812  // $CFG->phpunit_dataroot = '/home/example/phpu_moodledata';
     813  // $CFG->phpunit_directorypermissions = 02777; // optional
     814  // $CFG->phpunit_profilingenabled = true; // optional to profile PHPUnit runs.
     815  //
     816  //
     817  //=========================================================================
     818  // 10. SECRET PASSWORD SALT
     819  //=========================================================================
     820  // A site-wide password salt is no longer used in new installations.
     821  // If upgrading from 2.6 or older, keep all existing salts in config.php file.
     822  //
     823  // $CFG->passwordsaltmain = 'a_very_long_random_string_of_characters#@6&*1';
     824  //
     825  // You may also have some alternative salts to allow migration from previously
     826  // used salts.
     827  //
     828  // $CFG->passwordsaltalt1 = '';
     829  // $CFG->passwordsaltalt2 = '';
     830  // $CFG->passwordsaltalt3 = '';
     831  // ....
     832  // $CFG->passwordsaltalt19 = '';
     833  // $CFG->passwordsaltalt20 = '';
     834  //
     835  //
     836  //=========================================================================
     837  // 11. BEHAT SUPPORT
     838  //=========================================================================
     839  // Behat test site needs a unique www root, data directory and database prefix:
     840  //
     841  // $CFG->behat_wwwroot = 'http://127.0.0.1/moodle';
     842  // $CFG->behat_prefix = 'bht_';
     843  // $CFG->behat_dataroot = '/home/example/bht_moodledata';
     844  //
     845  // You can override default Moodle configuration for Behat and add your own
     846  // params; here you can add more profiles, use different Mink drivers than Selenium...
     847  // These params would be merged with the default Moodle behat.yml, giving priority
     848  // to the ones specified here. The array format is YAML, following the Behat
     849  // params hierarchy. More info: http://docs.behat.org/guides/7.config.html
     850  // Example:
     851  //   $CFG->behat_config = array(
     852  //       'Mac-Firefox' => array(
     853  //           'suites' => array (
     854  //               'default' => array(
     855  //                   'filters' => array(
     856  //                      'tags' => '~@_file_upload'
     857  //                   ),
     858  //               ),
     859  //           ),
     860  //           'extensions' => array(
     861  //               'Behat\MinkExtension' => array(
     862  //                   'selenium2' => array(
     863  //                       'browser' => 'firefox',
     864  //                       'capabilities' => array(
     865  //                           'platform' => 'OS X 10.6',
     866  //                           'version' => 20
     867  //                       )
     868  //                   )
     869  //               )
     870  //           )
     871  //       ),
     872  //       'Mac-Safari' => array(
     873  //           'extensions' => array(
     874  //               'Behat\MinkExtension' => array(
     875  //                   'selenium2' => array(
     876  //                       'browser' => 'safari',
     877  //                       'capabilities' => array(
     878  //                           'platform' => 'OS X 10.8',
     879  //                           'version' => 6
     880  //                       )
     881  //                   )
     882  //               )
     883  //           )
     884  //       )
     885  //   );
     886  // You can also use the following config to override default Moodle configuration for Behat.
     887  // This config is limited to default suite and will be supported in later versions.
     888  // It will have precedence over $CFG->behat_config.
     889  // $CFG->behat_profiles = array(
     890  //     'phantomjs' => array(
     891  //         'browser' => 'phantomjs',
     892  //         'tags' => '~@_file_upload&&~@_alert&&~@_bug_phantomjs',
     893  //         'wd_host' => 'http://127.0.0.1:4443/wd/hub',
     894  //         'capabilities' => array(
     895  //             'platform' => 'Linux',
     896  //             'version' => 2.1
     897  //         )
     898  //     ),
     899  // );
     900  //
     901  // You can force the browser session (not user's sessions) to restart after N seconds. This could
     902  // be useful if you are using a cloud-based service with time restrictions in the browser side.
     903  // Setting this value the browser session that Behat is using will be restarted. Set the time in
     904  // seconds. Is not recommended to use this setting if you don't explicitly need it.
     905  // Example:
     906  //   $CFG->behat_restart_browser_after = 7200;     // Restarts the browser session after 2 hours
     907  //
     908  // All this page's extra Moodle settings are compared against a white list of allowed settings
     909  // (the basic and behat_* ones) to avoid problems with production environments. This setting can be
     910  // used to expand the default white list with an array of extra settings.
     911  // Example:
     912  //   $CFG->behat_extraallowedsettings = array('somecoresetting', ...);
     913  //
     914  // You should explicitly allow the usage of the deprecated behat steps, otherwise an exception will
     915  // be thrown when using them. The setting is disabled by default.
     916  // Example:
     917  //   $CFG->behat_usedeprecated = true;
     918  //
     919  // If you are using a slow machine, it may help to increase the timeouts that Behat uses. The
     920  // following example will increase timeouts by a factor of 3 (using 30 seconds instead of 10
     921  // seconds, for instance).
     922  // Example:
     923  //   $CFG->behat_increasetimeout = 3;
     924  //
     925  // Including feature files from directories outside the dirroot is possible if required. The setting
     926  // requires that the running user has executable permissions on all parent directories in the paths.
     927  // Example:
     928  //   $CFG->behat_additionalfeatures = array('/home/developer/code/wipfeatures');
     929  //
     930  // You can make behat save several dumps when a scenario fails. The dumps currently saved are:
     931  // * a dump of the DOM in it's state at the time of failure; and
     932  // * a screenshot (JavaScript is required for the screenshot functionality, so not all browsers support this option)
     933  // Example:
     934  //   $CFG->behat_faildump_path = '/my/path/to/save/failure/dumps';
     935  //
     936  // You can make behat pause upon failure to help you diagnose and debug problems with your tests.
     937  //
     938  //   $CFG->behat_pause_on_fail = true;
     939  //
     940  // You can specify db, selenium wd_host etc. for behat parallel run by setting following variable.
     941  // Example:
     942  //   $CFG->behat_parallel_run = array (
     943  //       array (
     944  //           'dbtype' => 'mysqli',
     945  //           'dblibrary' => 'native',
     946  //           'dbhost' => 'localhost',
     947  //           'dbname' => 'moodletest',
     948  //           'dbuser' => 'moodle',
     949  //           'dbpass' => 'moodle',
     950  //           'behat_prefix' => 'mdl_',
     951  //           'wd_host' => 'http://127.0.0.1:4444/wd/hub',
     952  //           'behat_wwwroot' => 'http://127.0.0.1/moodle',
     953  //           'behat_dataroot' => '/home/example/bht_moodledata'
     954  //       ),
     955  //   );
     956  //
     957  // To change name of behat parallel run site, define BEHAT_PARALLEL_SITE_NAME and parallel run sites will be suffixed
     958  // with this value
     959  // Example:
     960  //   define('BEHAT_PARALLEL_SITE_NAME', 'behatparallelsite');
     961  //
     962  // Command line output for parallel behat install is limited to 80 chars, if you are installing more then 4 sites and
     963  // want to expand output to more then 80 chars, then define BEHAT_MAX_CMD_LINE_OUTPUT
     964  // Example:
     965  //   define('BEHAT_MAX_CMD_LINE_OUTPUT', 120);
     966  //
     967  // Behat feature files will be distributed randomly between the processes by default. If you have timing file or want
     968  // to create timing file then define BEHAT_FEATURE_TIMING_FILE with path to timing file. It will be updated for each
     969  // run with latest time taken to execute feature.
     970  // Example:
     971  //   define('BEHAT_FEATURE_TIMING_FILE', '/PATH_TO_TIMING_FILE/timing.json');
     972  //
     973  // If you don't have timing file and want some stable distribution of features, then you can use step counts to
     974  // distribute the features. You can generate step file by executing php admin/tool/behat/cli/util.php --updatesteps
     975  // this will update step file which is defined by BEHAT_FEATURE_STEP_FILE.
     976  // Example:
     977  //   define('BEHAT_FEATURE_STEP_FILE', '/PATH_TO_FEATURE_STEP_COUNT_FILE/stepcount.json');
     978  //
     979  // Feature distribution for each process is displayed as histogram. you can disable it by setting
     980  // BEHAT_DISABLE_HISTOGRAM
     981  // Example:
     982  //   define('BEHAT_DISABLE_HISTOGRAM', true);
     983  //
     984  // Mobile app Behat testing requires this option, pointing to a developer Moodle app directory:
     985  //   $CFG->behat_ionic_dirroot = '/where/I/keep/my/git/checkouts/moodleapp';
     986  //
     987  // The following option can be used to indicate a running Ionic server (otherwise Behat will start
     988  // one automatically for each test run, which is convenient but takes ages):
     989  //   $CFG->behat_ionic_wwwroot = 'http://localhost:8100';
     990  //
     991  //=========================================================================
     992  // 12. DEVELOPER DATA GENERATOR
     993  //=========================================================================
     994  //
     995  // The developer data generator tool is intended to be used only in development or testing sites and
     996  // it's usage in production environments is not recommended; if it is used to create JMeter test plans
     997  // is even less recommended as JMeter needs to log in as site course users. JMeter needs to know the
     998  // users passwords but would be dangerous to have a default password as everybody would know it, which would
     999  // be specially dangerouse if somebody uses this tool in a production site, so in order to prevent unintended
    1000  // uses of the tool and undesired accesses as well, is compulsory to set a password for the users
    1001  // generated by this tool, but only in case you want to generate a JMeter test. The value should be a string.
    1002  // Example:
    1003  //   $CFG->tool_generator_users_password = 'examplepassword';
    1004  //
    1005  //=========================================================================
    1006  // 13. SYSTEM PATHS (You need to set following, depending on your system)
    1007  //=========================================================================
    1008  // Ghostscript path.
    1009  // On most Linux installs, this can be left as '/usr/bin/gs'.
    1010  // On Windows it will be something like 'c:\gs\bin\gswin32c.exe' (make sure
    1011  // there are no spaces in the path - if necessary copy the files 'gswin32c.exe'
    1012  // and 'gsdll32.dll' to a new folder without a space in the path)
    1013  //      $CFG->pathtogs = '/usr/bin/gs';
    1014  //
    1015  // Path to PHP CLI.
    1016  // Probably something like /usr/bin/php. If you enter this, cron scripts can be
    1017  // executed from admin web interface.
    1018  // $CFG->pathtophp = '';
    1019  //
    1020  // Path to du.
    1021  // Probably something like /usr/bin/du. If you enter this, pages that display
    1022  // directory contents will run much faster for directories with a lot of files.
    1023  //      $CFG->pathtodu = '';
    1024  //
    1025  // Path to aspell.
    1026  // To use spell-checking within the editor, you MUST have aspell 0.50 or later
    1027  // installed on your server, and you must specify the correct path to access the
    1028  // aspell binary. On Unix/Linux systems, this path is usually /usr/bin/aspell,
    1029  // but it might be something else.
    1030  //      $CFG->aspellpath = '';
    1031  //
    1032  // Path to dot.
    1033  // Probably something like /usr/bin/dot. To be able to generate graphics from
    1034  // DOT files, you must have installed the dot executable and point to it here.
    1035  // Note that, for now, this only used by the profiling features
    1036  // (Development->Profiling) built into Moodle.
    1037  //      $CFG->pathtodot = '';
    1038  //
    1039  // Path to unoconv.
    1040  // Probably something like /usr/bin/unoconv. Used as a fallback to convert between document formats.
    1041  // Unoconv is used convert between file formats supported by LibreOffice.
    1042  // Use a recent version of unoconv ( >= 0.7 ), older versions have trouble running from a webserver.
    1043  //      $CFG->pathtounoconv = '';
    1044  //
    1045  //=========================================================================
    1046  // 14. ALTERNATIVE FILE SYSTEM SETTINGS
    1047  //=========================================================================
    1048  //
    1049  // Alternative file system.
    1050  // Since 3.3 it is possible to override file_storage and file_system API and use alternative storage systems (e.g. S3,
    1051  // Rackspace Cloud Files, Google Cloud Storage, Azure Storage, etc.).
    1052  // To set the alternative file storage system in config.php you can use the following setting, providing the
    1053  // alternative system class name that will be auto-loaded by file_storage API.
    1054  //
    1055  //      $CFG->alternative_file_system_class = '\\local_myfilestorage\\file_system';
    1056  //
    1057  //=========================================================================
    1058  // 15. CAMPAIGN CONTENT
    1059  //=========================================================================
    1060  //
    1061  // We have added a campaign content to the notifications page, in case you want to hide that from your site you just
    1062  // need to set showcampaigncontent setting to false.
    1063  //
    1064  //      $CFG->showcampaigncontent = true;
    1065  //
    1066  //=========================================================================
    1067  // ALL DONE!  To continue installation, visit your main page with a browser
    1068  //=========================================================================
    1069  
    1070  require_once (__DIR__ . '/lib/setup.php'); // Do not edit
    1071  
    1072  // There is no php closing tag in this file,
    1073  // it is intentional because it prevents trailing whitespace problems!
    

    Search This Site: